• Body Parts RSS Feed

      1933/34 Front and Rear Fender Set 

      by
      Media Rep
      Published on 10-09-2011 11:11 AM
      Article Preview

      SAR’s Tru-Fit fenders are stamped from brand new tooling patterned after original design and dimensions. Fitment to ’34 model cars should be exact while ’33 model cars will require very minor modifications, if in fact any, at the lower grille areas. Front fenders fit 2/4 Door Sedans, Roadster, Cabriolet, 3/5-Window Coupes. Rear Fenders fit Roadster, Cabriolet, 3/5-Window Coupes and Sedans with pre-scribed minor trimming. These brand new fenders are more expensive than the reproduction fenders that have been available in the past, but they are correct unlike the others. The outer bead on the Brand “X” fenders are too wide and has a peaked crease in the center. Also Brand “X” fenders do not have a consistent arch to the wheel well opening when viewed from the side. They also just plain do not fit cars. There is much cutting and welding to make them fit a car. Our new fenders have corrected all of these issues at a great expense in new modern state of the art tooling in Detroit. SAVE $400 WHEN YOU BUY A FULL SET (2 fronts & 2 rears) OF FENDERS!
      ...
      Read More Read More

      Eddie Motorsports Introduces New ‘67-’81 Camaro Fender Braces 

      by
      Media Rep
      Published on 09-08-2011 04:43 PM
      1. Categories:
      2. Product Showcase
      Article Preview

      A complete line of custom billet aluminum fender/core support braces for first- and second-generation Camaros has been introduced by Eddie Motorsports.
      The complete fender brace assemblies are CNC-machined from billet 6061-T6 aluminum and are available in two styles: a fixed rectangular assembly and a round adjustable model which incorporates two 3/8-inch rod ends. The fender braces are sold in pairs and can be purchased with a raw machined or polished finish. A variety of Fusioncoated color finishes are also available.

      The braces are designed to replace the stock steel components and are a direct bolt-on part with no cutting or drilling required, said the company. They come with all necessary stainless steel fasteners required for installation.
      ...
      Read More Read More

      Eddie Motorsports new billet aluminum hood pins 

      by
      Media Rep
      Published on 08-12-2011 12:55 PM
      1. Categories:
      2. Product Showcase
      Article Preview

      There's nothing more frightening or potentially more damaging than a hood that?s blown loose on your classic car at high speeds. Eddie Motorsports new billet aluminum hood pins will insure that this never happens to your car. The complete custom hood pin assemblies are CNC machined from billet 6061-T6 aluminum and like all products produced by Eddie Motorsports, they are American made to the strictest manufacturing standards.
      ...
      Read More Read More

      Superior Glass Works Introduces New 1941-46 Chevrolet Truck One-Piece Hood Top 

      by
      Media Rep
      Published on 07-07-2011 05:22 PM
      Article Preview

      Superior Glass Works today announced the addition of a one-piece, fiberglass, hood top for the 1941-1946 Chevrolet pickup and panel trucks. This hood maintains the original size, shape, bead lines, and dimensions of the stock, two-piece, center hinged hood so it will mate up perfectly with your vintage cab and grill. To achieve the custom, hot rod look, the center hinge has been smoothed and the gap at the front of the hood has been filled. Superior Glass Works has been producing one-piece hoods for other popular Chevrolet cars and trucks for many years, and are excited about this latest addition for these popular “Art Deco” Chevy trucks. In addition to this new hood, they also manufacture fiberglass front fenders, rear fenders, 2" wider rear fenders, and smooth running boards for these trucks, and their custom chassis shop can build you a new chassis to go under all those new body parts.
       ...
      Read More Read More

      Chevy II Front Inner Fenders Now Available From Detroit Speed 

      by
      Media Rep
      Published on 07-03-2011 05:25 PM
      Article Preview

      Detroit Speed has introduced new front inner fenders that are designed to fit 1962-1967 Chevy II vehicles equipped with the company’s Chevy II Front Frame. The new front inner fenders will completely hide the Front Frame Down Bars, resulting in a neat and clean under-hood appearance, said the company.
      ...
      Read More Read More

      SHINY SOLUTION 

      by
      Media Rep
      Published on 05-07-2011 11:43 AM
      Article Preview

      Need a shiny solution to your tailgate chain problem? Try stainless link assemblies. MAR-K now makes stainless link assemblies, which are used in custom applications for replacing old tailgate chains. Available for GM 54-87 (and now for 34-87 GM Stepsides, 53-87 Ford Flaresides and 48-85 Dodge Highside Stepsides), each pair includes links, upper and lower pivots and installation hardware. Insturctions are also included. This kit requires modification to the bed sides and tailgate. These stainless link assemblies are made by MAR-K in Oklahoma City. MAR-K mades a wide assortment fo restoration and custom parts for GM trucks, fullsize or mini.
      ...
      Read More Read More

      New GM Muscle Car Exterior Door Handles From Fesler Built 

      by
      Media Rep
      Published on 05-07-2011 11:34 AM
      Article Preview

      Fesler Built now offers new GM exterior door handles for 1960s and 1970s muscle cars. The door handles are made from 6061 aerospace-grade billet aluminum and are sealed with a gasket made to fit in the stock location. Each door handle set includes the handle, button, pin, spring and all mounting hardware. They are sold in pairs.

      The new exterior door handles will fit the following applications: 1964-1967 Chevy Chevelle, 1966-1967 Pontiac Lemans, 1967-1969 Chevy Camaro, 1967-1969 Pontiac Firebird, 1968-1975 Chevy Nova, 1970-1972 Buick Skylark, 1971-1975 Ventura II and 1973-1975 Oldsmobile Omega.
      Available finishes include: brushed, polished, chrome (shown), and clear or black anodized. Fesler
      ...
      Read More Read More

      OER Introduces 2nd-Gen Camaro Fuel Door Emblems 

      by
      Media Rep
      Published on 05-07-2011 11:32 AM
      Article Preview

      Classic Industries now offers 1978-1979 Camaro fuel door emblems that are manufactured by OER. The emblems are officially licensed by GM Restoration Parts and will install directly into the center of the rear fuel door of 1978-1979 Chevy Camaros and 1979 Z28 models.
      They have been designed to replicate the original exactly, said the company, and each emblem features a correctly colored tri-bar design inset and the gold Bow Tie on the bottom, all on a black background with argent edging under a clean lens.

      ...
      Read More Read More
      Page 4 of 5 FirstFirst ... 2345 LastLast