Installing a Welder Series Sway Bar Kit

Sway Bar Kit (anti-roll bar), rear, 36" wide, but can be cut down (with a hack saw) to any length.. The bar is ¾" diameter with one end splined ¾-36. The other end of the bar is smooth. This smooth end gets pinned and welded into a coupler which attached to one of the arms. The laser-cut, 3/8" thick arms are 8" center-to-center. Formed tabs weld to the outer tube and connect the bar to the rear crossmember using the coil-over bolts. Urethane bushings insulate road vibration. Rod ends connect the arms to the tabs that weld to the rear end. Overall length is ¾" longer than the bar length, since the 3/8" arms mount outside the ends of the bar. The arms can be bent to clear the coil-overs.


To mount the sway bar to a crossmember tube without coilover bolts,please see the video "Sway Bar Options".





















Sway Bar Kit (anti-roll bar), rear, 36" wide trim-to-fit #WS22700

If you have any questions about this or any of our products, please get in touch.


Thanks for your time,
DW Horton
Welder Series Inc.
Email DW