1st Gen Nova Zero Offset Caliper Bracket

I have purchased the zero offset disc brake kit for a 1st gen Nova. When i install the caliper brackets (p/n's 31758 & 31759) that were included in kit # 6467dbk the loaded caliper will not fit over the zero offset rotor. These brackets work fine on the original 5 lug spindles but not on CPP drops. Do I need caliper brkt p/n's 31947 & 31948 for the zero offset rotors and drop spindles?

Thanks
Frank

Good Morning,

Do you have the Pn#6267BA-K (upper Shims) for the anchor bolts at the top of the spindles? these are machined spacers so the caliper bracket will sit flush and square to the spindle. These are a must when using a drop spindle with that brake kit.

hi Arron, thanks for the reply... I do not have the shim that you mentioned for the spindle top bolt. It was not in the kit I purchased. Also the spindle top bolt (5/8 dia) that was included in the kit will be too short to anchor in the caliper brkt and the machined shim. Does CPP have a p/n for the longer bolt?

Thanks
Frank

Yes, Please call us up at 800-522-5004. The shim kit is a seperate item from the spindles since it is only for one type of braking kit.

thanks Aaron...called Danny and the shim kit is on its way here....I appreciate the customer service at CPP.


Frank