1969 camaro powersteering

[murf069]

Hi there i am after a power steering box and pump for my LHD 1969 Camaro at the moment it is Manual steering what box would you reccomend to put in it as i dont want it to be real light steering and floaty feeling. I would like the pump and hydrolic lines pit man arm and new coupling could you reccomend and let me know the part numbers and shipping to australia postcode 6210 Cheers Glenn

Driveline is 502 bigblock
LHD
1969 Camaro
2wd
running a electric water pump so i will need the brackets and pump to suit.

[CPPAaron]

The CP50004 steering kit would be the best; We can setup a kit specific to your needs. Shipping is based off of actual weight and we ship internationally via DHL, FED-EX and BAX so we try and get you the best rate possible.
Here is the link to our steering gear. Brand new box! not a reman like others;


http://www.classicperform.com/NewPro.../Series500.htm

[murf069]

I think I found the box , it says 50004, do i need a rag joint to bolt to the new powersteering box that you reccommend (50004) or do I use the old one from my old powersteerimg box?
, is there any other part i would need?
Thanks Murf069
And there is no way you are able to give me a cost on postage???? With this part....

The CP50004 steering kit would be the best; We can setup a kit specific to your needs. Shipping is based off of actual weight and we ship internationally via DHL, FED-EX and BAX so we try and get you the best rate possible.
Here is the link to our steering gear. Brand new box! not a reman like others;


http://www.classicperform.com/NewPro.../Series500.htm

[murf069]

I think I found the box , it says 50004, do i need a rag joint to bolt to the new powersteering box that you reccommend (50004) or do I use the old one from my old powersteerimg box?
, is there any other part i would need?

And there is no way you are able to give me a cost on postage???? With this part....
Thanks Murf069

[CPPAaron]

The steering box uses a 3/4x30 spline rag joint. They are part # RJC-730R. you will also need a pitman arm 6769PA-P. If you Email me with your full address and info I can get a shipping quote. My email is: aaron@classicperform.com