Camaro 1967 pro touring kit question

[Sebastien Letourneau]

And also, can i use stock steering arm with the 30100 drop spindle?
Is the 30100 need to be paint?
thanks

[CPPAaron]

Use the hardware that comes with the QA-1 as it is meant to support the car. The clip and the smaller bolt is only for coilspring applications.

The ball joint is the only way to buy the boot. They do not come seperate.

If the spindle assembly came bolted together the bearings are greased and ready to go.

The Spindles are raw iron so painting or clear coating is recommended to keep rust away.

[Sebastien Letourneau]

Thanks for the support
i want to be sure before enlarge the hole in the lower arm because the 2 hole are near the big hole for the bottom of the shock.
do you have the part number for the ball joint and the boot?
the wheel bearing was in a separate bag and there no grease on them,
do you have the torque for the nut that hold the hub?
do i need a specal steering arm fo the 30100 spindle?
thanks

[Sebastien Letourneau]

Hello Aaron
just want to know if you received my question from last night? Thanks

[Sebastien Letourneau]

Any update about the part number for the ball joint ?

[CPPAaron]

The upper ball joint is a part # FA487