Results 1 to 5 of 5

Thread: Control arms geometry correction

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Control arms geometry correction

    I am looking to get as minimum the stage 2 touring kit for my 67 camaro rs vert. I am cleaning/repairing the subframe and going back with new stuff. The g-mod has not been done yet. I have read some control arms fix and some don't. So do the CPP arms retain stock and need the g-mod or not? Don't want to do something if not required.

  2. #2

    Default

    CPP Control arms work with factory front ends. They maintain stock geometry with the acception of the upper control arm allows more positive caster to be set. So if the subframe remains original this will work out just fine.

    Feel free to contact me directly if you have any other questions. I'd be happy to help.
    Aaron Strietzel
    Email Aaron
    Classic Performance Products Inc.
    378 E. Orangethorpe Ave
    Placentia, CA 92870
    Visit Our Site
    714/522-2000
    714/522-2500 fax

  3. #3

    Default

    Sorry but wanting to make sure I understand. You are stating I would NOT need to do the g-mod relocating the upper control arms down with the CPP arms? Do you know how much more adjustment would it give me over stock?

  4. #4

    Default

    correct.... The front end remains factory specs. The use of our upper arms allow up to 5 degrees of positive caster to be adjusted in.
    Aaron Strietzel
    Email Aaron
    Classic Performance Products Inc.
    378 E. Orangethorpe Ave
    Placentia, CA 92870
    Visit Our Site
    714/522-2000
    714/522-2500 fax

  5. #5

    Default

    Feel free to contact me directly if you have any other questions. I'd be happy to help.


    klondike

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •