Results 1 to 3 of 3

Thread: Ford 9" rear disc brake pads over edge of disc

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Ford 9" rear disc brake pads over edge of disc

    I have purchased the 9" ford 5x5.5 truck disc brake kit.
    After mounting everything, the brake pads appear to overhang the rotors.
    In other words, looks like there is a miss-alignment of the caliper, sitting too far away/back on the rotor.
    See attached photos.

    - the rotors measure 11.75" or 11 3/4"
    - after mounting the calipers, the brake pads over hang the rotors by approximately 1/4"

    Did I miss something, or order the wrong kit?

    DiscBrakePadOffset3.jpgDiscBrakePadOffset4.jpg

    Warren
    Attached Images Attached Images

  2. #2

    Default

    I have seen this on occasion due to differences in the housing flanges. Slight overhang will not cause any issue with braking. You could loosen up the bracket and push them down as possible to help bring them down. Otherwise this is ok
    Aaron Strietzel
    Email Aaron
    Classic Performance Products Inc.
    378 E. Orangethorpe Ave
    Placentia, CA 92870
    Visit Our Site
    714/522-2000
    714/522-2500 fax

  3. #3

    Default

    Quote Originally Posted by CPPAaron View Post
    I have seen this on occasion due to differences in the housing flanges. Slight overhang will not cause any issue with braking. You could loosen up the bracket and push them down as possible to help bring them down. Otherwise this is ok
    Thank you for the reply.
    I will do as you say.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •