Results 1 to 2 of 2

Thread: Front Brake Lines 1969 Chevelle

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Front Brake Lines 1969 Chevelle

    I havea customer that has brought in a 1969 chevelle and asked us to install thisdisc brake conversion kit. He purchased the Willwood front disc brake kit with drop spindles, dual master cylinder with valve, and front brake line kit from CPP. Everything seems to be correct with the exception of the front brake line kit. The part number is 6872FLK-OM and the instructions reference 2 mounting clips to the frame and a brass union that are supposed to be supplied but are missing. I also do not see anyway that any of these brake lines will work on this car.

    Can you post a picture of what lines are supposed to be in this kit or any type of diagram on installtion?

  2. #2

    Default

    The front line kit is setup to mount the proportional valve down onto the frame rail like the factory metering valve.
    so the lines run from the master to the valve as mounted and the stock front to rear line goes into the back of the valve and the stock front lines hook to the front of the valve.
    Aaron Strietzel
    Email Aaron
    Classic Performance Products Inc.
    378 E. Orangethorpe Ave
    Placentia, CA 92870
    Visit Our Site
    714/522-2000
    714/522-2500 fax

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •