Results 1 to 3 of 3

Thread: Firewall Brake Booster Kit

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Question Firewall Brake Booster Kit

    I bought a 7" dual diaphragm booster/master cylinder/prop valve combo from Classic Industries under their part number PB828D. The prop valve has a CPP sticker on it, the master cylinder has CPP embossed on the sides so I'm pretty sure it is the same kit as CPP part number 5864BB4. Question 1- is this the same kit? Question 2 - what size bore is the master cylinder? I'm not getting near enough brake pressure so I have a hard pedal.

  2. #2

    Default

    same kit. The master is a 1" bore. Generally a hard pedal is a booster that does not have enough vacuum from the engine. All booster need 18" at idle as a minimum.
    Aaron Strietzel
    Email Aaron
    Classic Performance Products Inc.
    378 E. Orangethorpe Ave
    Placentia, CA 92870
    Visit Our Site
    714/522-2000
    714/522-2500 fax

  3. #3

    Default

    Thanks Aaron! Plenty of vacuum so I've narrowed it down to low pressure. I'm running Wilwoods on the front vs. single piston calipers, so that's probably why the system wants more pressure. I'll try a 7/8" master cylinder and see what kind of results I get. The car stops fine just have a hard pedal when I am stopped.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •