Results 1 to 3 of 3

Thread: rear disc brake problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default rear disc brake problem

    Hi my 56 belair with CCP rear disc kit had way too much travel in my emergency brake and the brake pads were loose in the calipers so downloaded CCP adjustment procedure for Cadillac-style calipers and followed that but now i have near on no pressure and the pedal almost goes to the floor and takes way longer to stop (dangerous) any idea where I went wrong..?

  2. #2
    Junior Member
    Join Date
    Jun 2015
    Location
    Idaho Panhandle
    Posts
    1

    Default Rear Brakes

    I too have the Cadillac style calipers from CCP on my '68 Camaro RS/SS. I followed the instructions for adjusting the brakes and I can't get any pedal either. When I push the pedal down there is some pressure but it goes all the way to the floor. When I pinch the rear rubber hose, cutting off the rear brakes, I get a good half pedal. I too am trying to figure out where I went wrong.
    One problem I have is the instructions say to take the emergency brake lever off and turn the 9/16 nut the opposite direction from normal. I do this and I still have no brakes.
    Help!!!!!

  3. #3

    Default

    Anymore help on this i’m having same issue

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •